Buy State Flags from Allstate FlagsBuy US flags from Five Star Flags
This page is part of © FOTW Flags Of The World website

Indian Navy Flags

Last modified: 2004-06-12 by rob raeside
Keywords: india | military | navy | war ensign | rank flags |
Links: FOTW homepage | search | disclaimer and copyright | write us | mirrors




See also:

Currently Used Naval Ensign (2004 series)

[War Ensign] 1:2 by Zeljko Heimer

The 1950 pattern Naval Ensign has been restored, with the small addition of a national emblem in the centre of the cross, and that it has now been specified in proportion of 1:2. It is also interesting that the 1950 rank flags have been restored intact, and that the official specs are identical (with the addition of a Chakra of course) to those of their UK equivalents.
Christopher Southworth, 25 April 2004

The date of adoption is not firmly known, since the document on-line http://www.indiannavy.nic.in/new_ensign.pdf) announcing them is undated. However, it is clear that the Indian Navy used FOTW images to make some of the images in the document, and these images were not posted to the web by us until late January 2004 (Martin Grieve posted them to FOTW-mailing list in December 2003), and allowing some time for the Indian naval officers to track them down on FOTW and to include them in its documents, I would say that the decision signed by the President could not be more then a month or two old!
Zeljko Heimer, 29 April 2004

Construction Sheet

[War Ensign] 1:2 by Zeljko Heimer

The width of the red stripes composing the cross is 2/15 of the flag hoist size. The state emblem (lions) is set in the middle of the flag with size so: width 2/16 of the hoist and height 2/11 of the hoist. The national flag in the canton is as per the "'Flag Code of India' (reproduced in Chapter I of Navy Order (Spl) 03/2003)" (that we unfortunately do not have). This means that the details of the Chakra are not known to us (not only for this particular flag!). However, I believe that we could not be much mistaken if we say that the Chakra is inscribed in a circle with diameter "around 2/15" of the hoist. (Actually that may be a bit too large in comparison with the national flag that we currently show at the FOTW, where the Chakra is 5/6 of the white stripe - this would make it exactly 476.6 in the units on the image, but this is still an approximation.) The only way to retain the whole numbers in the diagram is making the hoist of 3960 units, and the figures on the sheet are still a bit clumsy.
Zeljko Heimer, 23 May 2004


Currently Used Rank Flags (2004 Series)

The navy blue Indian Naval Crest is also found in the flags of flag officer's. These are generally speaking 2:3 in the ratio and made up of a white field bordered in navy blue, with the Indian Naval Crest set towards the hoist and a varying number of stars according to rank in the free end:

Admiral of the Fleet

[Admiral of the Fleet] by Zeljko Heimer, 23 May 2004

Admiral of the Fleet flag is the same as the national flag, flown from the main mast.
Zeljko Heimer, 23 May 2004

Admiral

[Admiral] by Zeljko Heimer, 23 May 2004

[Admiral] 2:3 by Zeljko Heimer, 23 May 2004

White flag with the red horizontal and vertical bars and the Chakra in the middle. Ratio 2:3. The red stripes width are 1/6 of the hoist, the Chakra diameter is 6/15 of the hoist. (Note the significant difference from the prescribed size of Chakra and the one shown in the regulations, that is about the half of the prescribed size - unless I have made an error in computation...).
Zeljko Heimer, 23 May 2004

Vice Admiral

[Vice Admiral] by Zeljko Heimer, 23 May 2004

The Admiral's flag with a red ball added in the canton. For construction it is equal with the rear admiral, so see below.
Zeljko Heimer, 23 May 2004

Rear Admiral

[Rear Admiral] by Zeljko Heimer, 23 May 2004

[Rear Admiral] by Zeljko Heimer, 23 May 2004

As the flag of Admiral with a red ball each in the upper hoist quarter and the lower hoist quarter. The construction is equal to the admiral's flag, the balls have diameters equal to the half the white quarter height.
Zeljko Heimer, 23 May 2004

Commodore

[Commodore] by Zeljko Heimer, 23 May 2004

[Commodore] by Zeljko Heimer, 23 May 2004

White triangular swallow-tailed pennant with a red cross defaced with Chakra and with a red ball in the canton. The ratio is 1:2. The width at fly is 3/4 of the hoist width, and the indentation is 2/3 of the host. The vertical red stripe is at the middle between the hoist and the peak of the indentation. The red ball is offset slightly downwards.
Zeljko Heimer, 23 May 2004

Senior Officer

[Senior Officer] by Zeljko Heimer, 23 May 2004

[Senior Officer] by Zeljko Heimer, 23 May 2004

White triangular pennant with the red stripes defaced with the Chakra. Ratio 1:2. Width of the red stripes 1/6 of the hoist. Chakra diameter 6/15 of the hoist. The regulations clearly indicate that the stripes are centered as in the rectangular flag (i.e., as if the Admiral's flag was cut into a triangle), though it is far from the most pleasing design and I have quite a doubt that the real flags are made according to this design.
Zeljko Heimer, 23 May 2004

Masthead Pennant

[Senior Officer] by Zeljko Heimer, 23 May 2004

[Senior Officer] by Zeljko Heimer, 23 May 2004

White triangular pennant with at hoist the red cross defaced with the Chakra. The length of the horizontal red stripe is 12 times the width at hoist. The width of the stripes is 1/6 of the hoist and the Chakra diameter is 6/15 of the hoist. The length of the flag differs for various prescribed flag sizes, from 1:36 for the smallest to 1:86.4 for the largest. (The prescribed sizes are 1"x1yd, 1.25"x2yd, 1.5"x3yd, 2#x4yd and 2.5-3"x6yd.)
Zeljko Heimer, 23 May 2004